Sale!

AMS Performance Omega Brushless Dual Fuel Pump System for R35 Nissan GT-R

Original price was: $3,674.95.Current price is: $3,564.70.

Omega Brushless Dual Fuel Pump System

2009-2022 Nissan GT-R

2 in stock (can be backordered)

SKU: ALP.07.07.0010-2 Categories: , Brand:
DESCRIPTION AND SPECIFICATIONS

AMS Performance Omega Brushless Dual Fuel Pump System for R35 Nissan GT-R

AMS Performance has developed the Omega Brushless Fuel Pump System as a comprehensive solution to address the longstanding fueling challenges faced by many GT-R owners. Previous fuel pump options for the GT-R often required compromises, leading to bulky, difficult-to-install, loud, and multiple pump setups that were prone to fuel starvation issues, primarily due to pressure loss caused by overheating. With these concerns in mind, the AMS engineering team embarked on a mission to create the ultimate fuel system for the future. After over 2 years of extensive research and testing, they have successfully engineered the definitive fueling solution for your R35 GT-R.

You can choose between their single pump system, which supports up to 1200 wheel horsepower, or the dual pump system for power levels exceeding 1200 wheel horsepower. Both options feature brushless pumps, ensuring enhanced performance and reliability for your GT-R’s fueling needs.

Why Is A Brushless Motor Better?

  • Heat generation is a common issue with brushed motor fuel pumps, stemming from the friction between the brushes and the commutator. This continuous rubbing action leads to wear and degradation of both the brushes and the commutator, making the fuel pump a wear item similar to brake pads and rotors. Additionally, pumping and pressurizing fuel also contribute to the generation of heat. Unlike brushless fuel pumps, which can adjust their output based on pressure requirements, brushed fuel pumps typically operate at a static output determined by the input voltage (battery voltage), resulting in the pump running at 100% duty cycle all the time. Consequently, the friction from the brushes and the constant pressurization of fuel combine to generate additional heat in the system.
  • In contrast, brushless motors offer distinct advantages over brushed motors as they do not experience the same friction, wear, and heat generation. This is due to the absence of physical contact between components, apart from a few bearings, and the utilization of a controller to regulate speed and output. The controller enables the pump to adjust its output based on the required pressure, leading to a notable reduction in fuel temperature. To ensure optimal performance, AMS Omega Fuel Pumps incorporate brushless motors of original equipment (OE) quality and automotive-grade brushless controllers, guaranteeing reliable and efficient operation.

Lower Fuel Temperature To Save Your VR38 Engine

  • A significant issue faced by your R35 GT-R is the overheating of fuel within the fuel tank. Compounded by the proximity of the tank to the heat-soaked GR6 transmission and exhaust, the situation is worsened by the presence of 2 or 3 inefficient brushed pumps inside the tank. AMS Performance has observed instances where fuel inside a GT-R fuel tank reached boiling temperatures with as little as 140°F (60°C). When fuel boils, the output of the pumps drops dramatically, resulting in reduced fuel supply to the engine. Insufficient fuel supply can trigger a lean condition, leading to detonation or extreme combustion temperatures that are capable of melting engine components.

Screw Style Pump For Maximum Fuel Output In The Most Demanding Conditions

  • The mechanical component of the fuel pump works in tandem with the electrical motor to pump and pressurize the fuel. Through extensive testing, AMS Performance discovered that the type of pump design significantly affects pumping efficiency, particularly under elevated fuel temperatures. Conventionally, vane-style or impeller-style pumps are utilized, but these can result in a significant drop in fuel output, reaching up to 50% at higher fuel temperatures. In contrast, the Omega Brushless Fuel Pump employs a screw-style pumping mechanism that is highly resistant to this phenomenon, ensuring consistent and reliable fuel delivery regardless of fuel temperature.

Super High Flow And Consistent Fuel Pressure

  • Standard fuel pumps commonly encounter pressure drop issues when operating at higher fuel pressures. However, AMS’ screw-style fuel pump sets a new standard by maintaining significantly higher pressure even under challenging operating conditions. This ensures consistent and reliable fuel delivery, allowing your engine to perform optimally without the limitations imposed by pressure drop.

Whisper Quiet Operation

  • Aftermarket fuel systems often introduce unwanted noise, detracting from the enjoyment of your driving experience with their irritating whine. This issue is compounded when multiple aftermarket pumps are required to meet the fuel demands of the powerful twin-turbo VR38 engine. However, the Omega Pump sets itself apart by offering a quieter operation compared to typical aftermarket pumps. Remarkably, just a single Omega Pump is capable of supplying sufficient fuel for an impressive 1200 wheel horsepower on regular gasoline, or 800 wheel horsepower on ethanol-based fuels like E85. With the Omega Pump, you can achieve exceptional performance without sacrificing a peaceful driving environment.

Small, Easy To Install Pump Unmatched By Others

  • Conventional high-output fuel pumps often pose challenges during installation due to their bulky size, typically necessitating the use of multiple pumps to meet fuel demands. This can make installation inside the fuel tank complex and may even require hazardous external mounting. In contrast, the Omega Pump is designed to fit seamlessly within the stock fuel tank and location, preserving the functionality of the factory fuel system. Despite its compact size, the Omega Pump boasts high capacity, allowing it to effectively replace the need for two conventional high-performance fuel pumps. Furthermore, AMS’ system includes a meticulously crafted precision CNC’d aluminum housing, along with all the necessary fittings and hardware, ensuring a clean and hassle-free installation process.

Substantial Fuel Delivery Increase Without Compromise

  • Instead of eliminating important functions of the fuel system, AMS Performance has made the decision to integrate them. The Omega Fuel System actually improves upon the factory saddle-style fuel system and the factory “surge tank,” both of which were originally designed to mitigate fuel starvation issues during intense cornering and acceleration. By enhancing these existing components, the Omega Fuel System ensures optimal fuel delivery and performance even under demanding driving conditions.

User Interface Makes Custom Tuning A Breeze

  • Unlike many other aftermarket fuel systems, the controller provided by AMS Performance enables you to customize the fuel output according to your specific requirements. They offer pre-set basic settings that facilitate a quick and easy setup process. However, if you desire advanced functionality, their user-friendly Graphic User Interface (GUI) allows for effortless custom programming of the pump. The pump output can be easily controlled in one of three ways, providing you with flexibility and convenience in managing your fuel system.
  • Basic : Set up a constant pump output simply by raising pump duty cycle to the desired fuel pressure.
  • Intermediate : Pump output can be staged based off of a switch. Using a Hobbs switch or WOT switch you can switch between two output percentages.
  • Advanced : Pump output can be referenced to a 0 to 5V input. Tapping into a MAP sensor or throttle position sensor will allow the fuel pump to linearly output more fuel as you increase throttle or increase MAP.

One Fuel System To Buy

  • Although opting for a lower-cost pump may initially seem appealing, the long-term consequences of overworking the pump and the potential damage it can cause to the engine can result in significantly higher costs. In comparison, the Omega Brushless System offers a cost-effective solution. This system allows for future expansion, as a single pump is capable of supporting 1200 wheel horsepower. Should your requirements exceed the capabilities of the single pump system, adding an additional Omega Brushless Pump to your existing setup is a straightforward process. Similar to adjusting a boost controller, you can easily fine-tune the required fuel for your specific configuration by making simple adjustments to the Omega Pump controller to achieve the desired flow. With this level of flexibility and control, the Omega Brushless System provides a reliable and adaptable fuel solution.

Tested And Proven On The World’s Fastest GT-Rs

  • The Omega Fuel System has undergone extensive testing and validation on various high-performance GT-Rs, including our flagship Alpha Omega. Over a span of more than 2 years, we have conducted rigorous long-term testing specifically on the brushless technology utilized in this system. This thorough testing ensures that you can confidently install the best fuel system in your GT-R, knowing that it has been tried, tested, and proven in real-world performance scenarios.

Features

  • Produces less heat lowering fuel temperature and prevent engine damage
  • Smaller for easy installation
  • USB thumb drive included with detailed install instructions
  • Quieter for driving comfort
  • High flow rate with no pressure drop
  • 1200HP capable with room to expand the system
  • Entire system neatly contained inside the fuel tank
  • Utilizes the factory “surge tank” to prevent fuel starvation
  • Simple user interface
  • Tested and proven on the world’s fastest R35 GT-Rs

Kit Contents

  • Billet fuel pump filter housing with pump installed and assembled
  • Wire harnesses
  • 3.5 Bar MAP sensor
  • Fuel pump controller
  • USB interface
  • USB thumb drive with software and detailed instructions
  • Inside tank hoses
  • Replaceable Fuel Filters: Pre-pump filter socks (Walbro 125-118) and post-pump 6 micron filter (Fuelab 71804)
  • All necessary hardware and fittings to install

Applications

  • 2009-2011 Nissan GT-R – R35 | CBA
  • 2012-2016 Nissan GT-R – R35 | DBA
  • 2017+ Nissan GT-R – R35 | EBA
  • Fits all USDM, JDM and European Models (LHD & RHD)

About AMS Performance

AMS Performance is founded on principles of integrity and is dedicated to automotive performance, particularly for turbocharged vehicles. As a leading manufacturer of automotive performance parts, AMS not only offers a wide range of high-quality components but also provides additional services such as in-house engine computer calibration, parts and package installations, and engine and transmission building.

At AMS, their primary focus lies in engineering. Unlike other shops, they prioritize the development of components that deliver unparalleled performance. Their approach goes beyond a basic understanding of engine performance, utilizing computer-aided designs and employing mechanical engineers with extensive experience in the motorsports field.

With a history spanning two decades, AMS Performance has consistently maintained its position at the forefront of the industry. Whether you seek complete turn-key packages or individual components, AMS has the expertise to meet and surpass various performance goals. From drag racing to road racing and everything in between, AMS is ready to enhance your driving experience and elevate your vehicle’s performance to new heights.

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions.
The GT-RR website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.
RELATED PRODUCTS
NEWSLETTER SIGNUP
GT-RR was founded in 2008 as the world's first and only retailer dedicated exclusively to the GT-R. After more than a decade, we're still the leader in product offerings for Nissan's supercar.